Length: 500MM
Width: 300 MM
Height: 220MM
Wheelbase: 328MM
Single gear ratio: 11.2：1
Tires: Φ135*55MM
This 1/10 sand Buggy has been our best-selling product since its launch. The unique rear axle design makes the car travel more steadily. The rear suspension of the battery is more conducive to heat dissipation while driving in sandy terrain. The powerful 3650 motor paired with a 2s Lipo battery and rechargeable battery charger make this Buggy an unparalleled race car under the sun.
Oil-filled shocks with extended travel absorb bumps and dunes, maintaining tire contact on uneven surfaces. Adjustable Camber & Toe Angles Customize suspension geometry for optimized stability and traction in loose sand.
1x 1/10 Brushless sand Buggy
1x Transmitter and receiver sets
1x Balance charger
1x instruction manual
4 x AAA Battery for the transmitter
2.4GHz Proportional Radio System
7.4V 3300MAH Lipo battery with Balance charger
45A ESC and 3650 Brushless Motor
Waterproof 3kg steering servo
Ready to Run with 4WD Shaft Drive
Fully covered receiver case
Rear Axle design with reinforced housing & adaptor
Light & High Impact Front Suspension Arms
Big Bored Shocks with long droop
Unique Steering System with Front Uniersal Joint Shafts
Reinforced Upper Plate to Stiff the Chassis Plate
Fully sealed central transmission for gear protection
High Quality RC System Offering Lots of Fun of Racing
Lights for option
Product Length | 19.69"（500mm) | Speed Control | 45A |
Product Weight | 8.82 Ib (4KG) | Spur gear | 62T |
Product Width | 11.81" (300MM) | Suspension | Independent |
Radio | 2.4G | Top speed | 55+ |
Scale | 1:10 | Vehicle Size | Standard |
Servo | 3KG | Vehicle Type | Sand buggy |
Shock Type | Oil-filled, coilover spring | wheelbase | 12.91" (328mm) |
Ball bearing | Full ball bearing | Chassis | composite |
Battery | 2S 3300MAH lipo | Completion Level | Ready to run |
body | Pre-painted Polyvinyl Chloride | Connector Type | Deans plug |
Distance of remote control | 100-150M | Drive Type | Forward, brake, Reverse |
Charger | Balanced charger | Motor Size | 3650 3300KV |
Pinion gear | 17T | Power Type | Electric |
Product Height | 8.66" ( 220mm) | Drive train | 4WD |
Operator Skill Level | Beginner | Play time | 10-15 minutes/cycle |
Unique steering system with front universal joint shafts.
The car can be well protected from overturning during high-speed driving or sharp turns.
We are committed to meeting the diverse needs of our global customers through innovation and continuous improvement.
Need more information?
If you didn't find what you need, you can send an inquiry through our contact form.
E-mail: info@vrx-racing.com
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
