RANGER Nitro 1/10 Scale 4WD On-road Nitro Powered RC Touring 2.4G Engine Single Speed RTR #RH1003
SPECIFICATIONS:
Product Length: 14.33"（364mm)
Product Width: 7.48" (190MM)
Product Height: 5.12" (130MM)
Tyres: Φ 63.5 X 26.5mm
Wheelbase: 256/261mm
overview
Factory assembled with waterproof servos and a 2.4ghz radio system, the nitro's shaft 4wd drivetrain, along with metal geared front and rear differentials is ready to handle the excitement that only a nitro engine can deliver.
This single-speed nitro methanol-powered cars off-road models combine mechanical engineering, fuel-powered performance, and driving excitemen, single-speed nitro SH engines) with nitro methane-blend fuel (typically 10%-30%) deliver high RPM and instant torque
This car come with unique gear design for low CG, ensuring that the inner and outer wheels rotate at different speeds during turns, enhancing handling and stability.
- Equipped with high torque 3kg plastic gear servos
- High Power SH 18 Engine with pull start
- Features dual dis brake system
- 80 cc fuel tank delivers long run times
- Full ball bearing specifications
- 1 x 1/10 nitro touring car
- 1 x Transmitter and Receiver Sets
- 1 x manual
- 4 PCS AAA batteries
features
Product specifications
|
Product Length |
14.33"（364mm) |
Product Height |
5.12" ( 130mm) |
|
Product Weight |
7.72Ib (3.5KG) |
Engine |
SH 18 Engine |
|
Product Width |
7.48" (190MM) |
Suspension |
Independent |
|
Radio |
2.4G |
Top speed |
55+ |
|
Scale |
1:10 |
Vehicle Size |
Standard |
|
Servo |
3KG |
Vehicle Type |
on road touring |
|
Shock Type |
Oil-filled, coilover spring |
wheelbase |
10.08/10.28" (256/261mm) |
|
Ball bearing |
Full ball bearing |
Chassis |
Metal |
|
body |
Pre-painted Polyvinyl Chloride |
Drive Type |
Forward,brake, |
|
Distance of remote control |
100-150M |
Power Type |
Nitro |
|
Age Range |
14+ |
Drive train |
4WD |
|
Tyres |
63.5 X 26.5MM |
Play time |
20 minutes/cycle |
Product details
Big bore oil filled adjustable shocks
The car come with big bore oil filled adjustable shocks, adjustable shock absorbers significantly enhance the adaptability and performance of remote control cars by allowing users to fine-tune spring preload, damping, travel, and angle. Proper adjustment and maintenance ensure the vehicle performs optimally under various road conditions.
Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc,proper adjustment can significantly improve straight-line stability and cornering agility. Through precise measurement and fine-tuning, players can optimize their car’s handling performance for different track conditions and driving needs, enjoying an ultimate driving experience.
The nitro engine is specifically designed for nitro remote control car, used the nitro fuel and energy-saved environmental, powerful and reliable operation.
Features a proven 2-stroke design with a wide RPM range (6500–28,000 RPM)
First gear optimizes launch acceleration, while second gear automatically engages for higher top speeds (60-65 km/h), balancing low-end punch and high-speed efficiency—ideal for long straights or technical tracks. can adjustments (e.g., carburetor needles, clutch springs, gear ratios), mimicking real motorsport engineering.
This 3KG servo provides sufficient steering force for 1/10 scale rc cars and high torque output, ensuring precise control during high-speed racing or complex terrain, Uses PWM signal control for millisecond-level angle adjustment, perfect for high-speed steering in racing scenarios, lightweight design to maintain vehicle balance and high speed stability
Gearbox metal crown & pinion gear and front and rear geared differentials, adapts to various surfaces, it helps the car perform better on different terrains (e.g, smooth tracks, offroad)
Get In Touch With Us
We are committed to meeting the diverse needs of our global customers through innovation and continuous improvement.
E-mail: info@vrx-racing.com